PGV-101-GS - 1" Plastic Globe Valve with Flow Control, Slip Inlet and Outlet
The Hunter PGV Valve is a professional grade line of valves that are built to work with a broad range of landscaping demands. All models feature durable, high-grade, corrosive and UV-resistant PVC construction, glass reinforced jarring and a rugged double-beaded, leak-proof diaphragm with support to prevent stress failure. This top-of-the-line valve has an internal manual bleed as well as dependable Hunter solenoid for long life and operation. Flow Control maximizes efficiency and prolongs the life of a system by fine tuning flow and pressure for each zone.
 
Features
Size: 1'' Slip Connection
The flow control knob works very similar to a hose bib or gate valve as its main function is to either fully allow or restrict the amount of water passing through the valve.
External and internal manual bleed allows quick and easy ''at the valve'' activation
Captive bonnet screws eliminate the possibility of lost parts during disassembly
Triple-tool bonnet screws are compatible with standard or Phillips screwdrivers as well as a nut driver
Double-beaded diaphragm seal design for superior leak-free performance
Encapsulated 24 VAC solenoid with captive plunger for hassle-free service
Optional DC latching solenoids enable Hunters battery-powered controllers (PGV-101-GS-DC has the DC Latching Solenoid pre-installed)
Low flow capability allows use of Hunters micro irrigation products
All Hunter valves are 100% water-tested before leaving the factory to verify every valve operates properly and give you total peace of mind after installation.
 
Operating Specifications
Flow rate: 0.2 to 40 GPM
Recommended pressure range: 20 to 150 PSI
Temperature rating: 150° F
Warranty period: 2 years
 
Solenoid Specifications
24 VAC solenoid
350 mA inrush, 190 mA holding, 60 cycles
370 mA inrush, 210 mA holding, 50 cycles