The Industry's #1 Plastic Residential Irrigation Valves
Rain Bird manufactures only the highest quality valves. Use DV/DVF series valves in locations where the use of a separate pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against backflow. Check your local city codes to determine what type of valves are required. All of our valves work with any standard sprinkler timer.
1 in. Slip Valve with Flow Control
Double-filtered (Diaphragm and Solenoid) pilot-flow design for maximum reliability and grit resistance.
Balanced-pressure diaphragm for long life.
External bleed to manually flush the system of dirt and debris during installation and system start-up.
Internal bleed for spray-free manual operation.
Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 microns) solenoid filter.
Buna-N diaphragm with self-cleaning 90 mesh (200 microns) pilot water filter and captive spring.
Operates in low-flow and Xerigation applications when the RBY filter is installed upstream.
1.25" (3,2 cm) stainless steel phillips head screws.
Accepts latching solenoid for use with Rain Bird battery-operated controllers.
Unique, easy-to-turn pressure assisted flow control mechanism (DVF Models Only)
Five-year trade warranty.
Not recommended for use with two-wire control systems
 
Product Details
Pressure: 15 to 150 psi (1.0 to 10.4 bar)
100-DVF Flow Control Model: 0.2 to 40 GPM. For flows below 3 GPM or any Xerigation application, use a 200 mesh filter installed upstream.
Temperature: Up to 110° F (43° C)
Ambient air temperature: Up to 125° F (52° C)
24 VAC 50/60 Hz (cycles per second) solenoid power requirement: 0.450A inrush current; 0.250A holding current
Solenoid coil resistance: 38 Ohms
 
DVF Valves
Height:5 3/5;" (14.2 cm)
Length:4 3/8;" (11.1 cm)
Length (MB):5 3/4;" (14.6 cm)
Width:3 1/3;" (8.4 cm)
1" Rain Bird 100-DVF-SS Valve
With Flow Control
1" Slip Inlet/ Outlet